1. Do you have an old account but can't access it?


    See Accessing your GIRS Account or Contact Us - We are here to help!
    Dismiss Notice

Where can I get large Acrylic sheets in CR/IC area?

Discussion in 'Cedar Rapids & Iowa City Region' started by CyberJester, Feb 15, 2008.

  1. CyberJester

    CyberJester Inactive User

    I am looking to build a new sump one with a fuge in it.
    Does anyone know where I can find either cut-to-spec acrylic or large (ex. 36" x 24") acrylic sheets in the CR/IC area or fairly close?
    Jeremy
     
  2. phishcrazee

    phishcrazee Experienced Reefkeeper

    I know Lowes has acrylic sheets and they can cut them to your specifications...... in the same isle as the chain. They also have some pre-cut pieces that you could probably use as well.
     
  3. CyberJester

    CyberJester Inactive User


    Cool, thanks.

    Did a search on the Lowe's web site and got nothing so wasn't sure.
     
  4. phishcrazee

    phishcrazee Experienced Reefkeeper

    Well, I know the Lowes in CV has large shheets of acrylic because I was just there /site/DesktopModules/NTForums/themes/_default/emoticons/smile.gif Maybe other ones don't?
     
  5. Wenszoo

    Wenszoo Inactive User

    cr does
     
  6. nick

    nick Well-Known ReefKeeper

    lowes and menards both carry em on hand
     
  7. Wenszoo

    Wenszoo Inactive User

    check with auto glass center on 8th ave in CR
     
  8. CyberJester

    CyberJester Inactive User


    Alright, I picked up some acrylic (enough for a sump and maybe even some in tank Frag baskets).

    Now I can't seem to to find the Weld-on Solvent cement or a needle to start bonding the acrylic.
    Anyone know where I can find Weld-on #4, a 10mil Syringe, and a #25 hypodermic needle?

    I checked both Lowes and home depot and neither of them have any of these items.
    I have found the stuff on the internet, anyone have any suggestions on where I could get these items locally.
    Thanks
     
  9. JB

    JB Veteran Reefkeeper


    There is a place in Iowa City that sells weld-on. Check out this thread.

    -JB
     
  10. CyberJester

    CyberJester Inactive User

    Thanks JB! [​IMG]
     
  11. Lee

    Lee Experienced Reefkeeper

    DO you know if Lowes/Mendards carries black acrylic?
     
  12. CyberJester

    CyberJester Inactive User

    I actually ask about that at Home depot and Lowes, neither of them carried Colored Arcylics.
     
  13. Phathead

    Phathead Well-Known ReefKeeper

    Regal plastics in des moines has everything you could want colors, sheets, even circles, spheres and they will cut to spec also they sell the weld on and syringes. Hope this helps. In case your curious I was just quoted yesterday 130.00 for a 4'X8' 1/4 acrylic. Not sure if this is average or not?
     
  14. calebjk

    calebjk Well-Known ReefKeeper

    Posted By lee on 03/03/2008 7:57 PM
    DO you know if Lowes/Mendards carries black acrylic?Menards has tinted acrylic. I usually go to seelye plastics in hiawatha, they seam more expensive than that place in des moines though.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice